|
|
 |
 |
|
SVII-K90
|
|
Are your APERTURES CLOGGED with PASTE?
How does clogged apertures effect your process?
- Your paste deposit volumes reduced
- Your reworks increased
- Your overall yield is reduced
- A greater downtime, if you need to remove stencil for a cleaning
To aid in preventing this issue:
StenTech, would like to introduce the Sunmenta Stencil Inspection System SVII-K90. The SVII-K90 is the leading fully automatic stencil inspection machine! The Inspection system can be used for incoming stencils and improve inspection after the cleaning process. It will identify partial and fully clogged apertures, right down to 01005.
Stencil
Inspection System SVII-K90 The SVII-K90 is the leading fully automatic stencil inspection machine, will reduce or eliminate the use of a stencil that has clogs after cleaning. After cleaning and before placing back into inventory.
The SVII-K90:
- Will scan your stencil very quickly
- a. Provide an output to show partial clogs
- b. Ability to automatically locate and view the image
- Operator can then decide whether to,can then
- a. Remove the clog manually
- b. Air Pressure
- c. Or the operator can put the stencil back through the cleaning process
|
|
|
|
Are your APERTURES CLOGGED with PASTE?
How does clogged apertures effect your process?
- Your paste deposit volumes reduced
- Your reworks increased
- Your overall yield is reduced
- A greater downtime, if you need to remove stencil for a cleaning
To aid in preventing this issue:
StenTech, would like to introduce the Sunmenta Stencil Inspection System SVII-K90. The SVII-K90 is the leading fully automatic stencil inspection machine! The Inspection system can be used for incoming stencils and improve inspection after the cleaning process. It will identify partial and fully clogged apertures, right down to 01005.
Stencil
Inspection System SVII-K90 The SVII-K90 is the leading fully automatic stencil inspection machine, will reduce or eliminate the use of a stencil that has clogs after cleaning. After cleaning and before placing back into inventory.
The SVII-K90:
- Will scan your stencil very quickly
- a. Provide an output to show partial clogs
- b. Ability to automatically locate and view the image
- Operator can then decide whether to,can then
- a. Remove the clog manually
- b. Air Pressure
- c. Or the operator can put the stencil back through the cleaning process
|
|
|
|
|
|
