|
 |
 |
 |
SMT Inspection Templates
|
Inspection templates enhance the visual inspection process by guiding the operator's eyes to a specific location on the board to check for the presence and correctness of components. |
StenTech’s pin support templates are manufactured from a clear acrylic material to allow for a rigid template. They are designed to match the board sizes, allowing you to process the template through different processes. By using it in your screen printer, you can easily guide the pins to support the board into place, reducing setup time, reducing damage to components by the pins and creating a good support for the board during printing. We can also provide our customers with a 1:1 ratio Mylar for inspection needs. We can generate your Mylars from Gerber or DXF files that are sent electronically. Benefits:- Assists in catching wrong or missing parts early in the production cycle
- Guides the inspector's eyes to the selected area only
- Speeds up the inspection
- Reduces new hire training time
- The process is highly accurate, cost-effective and safe
- Adds increased value to your quotes
- Dramatically reduces scrapped parts
Material Specs:- Chemically resistant
- Thickness: 0.040"
- Surface resistivity: ohms/sq 109-1011
Laser Specs:- Full Spectrum CO2 Laser
- PRO LF Series
- Working area of 32" x 24"
- 1.5" and 2" lens focus
- Water-cooled
Minimum Requirements: - Copper, paste and silk data
For boards that are not fully populated, BOM or PNP will be required
|
|
|
|
StenTech’s pin support templates are manufactured from a clear acrylic material to allow for a rigid template. They are designed to match the board sizes, allowing you to process the template through different processes. By using it in your screen printer, you can easily guide the pins to support the board into place, reducing setup time, reducing damage to components by the pins and creating a good support for the board during printing. We can also provide our customers with a 1:1 ratio Mylar for inspection needs. We can generate your Mylars from Gerber or DXF files that are sent electronically. Benefits:- Assists in catching wrong or missing parts early in the production cycle
- Guides the inspector's eyes to the selected area only
- Speeds up the inspection
- Reduces new hire training time
- The process is highly accurate, cost-effective and safe
- Adds increased value to your quotes
- Dramatically reduces scrapped parts
Material Specs:- Chemically resistant
- Thickness: 0.040"
- Surface resistivity: ohms/sq 109-1011
Laser Specs:- Full Spectrum CO2 Laser
- PRO LF Series
- Working area of 32" x 24"
- 1.5" and 2" lens focus
- Water-cooled
Minimum Requirements: - Copper, paste and silk data
For boards that are not fully populated, BOM or PNP will be required
|
 |
|
|
|
|